View MAAPGM0030_614690.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Amplifier, Power, 1W 5.0-9.0 GHz
Features
1 Watt Saturated Output Power Level Variable Drain Voltage (4-10V) Operation MSAGTM Process
903239 -- Preliminary Information
MAAPGM0030
Primary Applications
Multiple Band Point-to-Point Radio SatCom ISM Band
APGM0030 YWWLLLL
Description
The MAAPGM0030 is a packaged, single stage, 1W power amplifier with on-chip bias networks in a bolt down ceramic package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM's GaAs Multifunction Self-Aligned Gate (MSAGTM) Process. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling power, lownoise, switch and digital FETs on a single chip. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging.
Pin Number 1 2 3 4 5 6 7 8 9 10 RF Designator No Connection No Connection RF IN No Connection VGG No Connection No Connection RF OUT No Connection VDD
Absolute Maximum Conditions 1
Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF, 40% Idss) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Processing Temperature 1. Operation outside of these ranges may reduce product reliability. 1
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
Symbol PIN VDD VGG IDQ PDISS TJ TSTG
Absolute Maximum 23.0 +12.0 -3.0 470 3.2 180 -55 to +150 230
Units dBm V V mA W C C C
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W 5.0-9.0 GHz
Recommended Operating Conditions
Characteristic Drain Supply Voltage Gate Supply Voltage Input Power Junction Temperature Thermal Resistance Package Base Temperature Symbol VDD VGG PIN TJ JC TB 28.4 Note 2 Min 4.0 -2.4 Typ 8.0 -2.0 18 Max 10.0 -1.5 21 150
903239 -- Preliminary Information
MAAPGM0030
Unit V V dBm C C/W C
2. Maximum Package Base Temperature = 150C -- JC* VDD * IDQ
Electrical Characteristics: TB = 40C, Z0 = 50 , VDD = 8V, IDQ 300 mA3, Pin = 18 dBm, RG 240
Parameter Bandwidth Output Power Power Added Efficiency 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Supply Current Drain Supply Current Noise Figure 2nd Harmonic 3rd Harmonic Output Third Order Intercept 3 Order Intermodulation Distortion, Single Carrier Level = 21 dBm 5th Order Intermodulation Distortion, Single Carrier Level = 21 dBm
rd
Symbol f POUT PAE P1dB G VSWR VSWR IGG IDD NF 2f 3f OTOI IM3 IM5
Typical 5.0-9.0 30 35 30 14 1.8:1 2.0:1 <4 < 500 9 -20 -35 38 -15 -36
Units GHz dBm % dBm dB
mA mA dB dBc dBc dBm dBm dBm
3. Adjust VGG between -2.4 to -1.5V to achieve indicated IDQ.
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG -1.8V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 8 V. 3. Adjust VGG to set IDQ, (See Note 3 above). 4. Set RF input.
5. Power down sequence in reverse. Turn VGG off last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W 5.0-9.0 GHz
903239 -- Preliminary Information
MAAPGM0030
50
POUT PAE
50
50
POUT PAE
50
40
40
40
40
POUT (dBm)
20
20
PAE(%)
30
30
30
30
20
20
10
10
10
10
0 4 5 6 7 8 9 10
0
0 4 5 6 7 8 9 10
0
Frequency (GHz)
Drain Voltage (V)
Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V and Pin = 18 dBm.
Figure 2. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 7 GHz.
50
VDD = 4 VDD = 8 VDD = 6 VDD = 10
30
40
25
Gain Input VSWR Output VSWR
6
5
30
20
4
20
15
3
10
10
2
0 4 5 6 7 8 9 10
5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5
1 10.0
Frequency (GHz) Figure 3. 1dB Compression Point vs. Drain Voltage
Frequency (GHz) Figure 4. Small Signal Gain and VSWR vs. Frequency at VDD = 8V.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W 5.0-9.0 GHz
903239 -- Preliminary Information
MAAPGM0030
APGM0030
Figure 5. CR-15 Package Dimensions
The CR-15 is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish consists of electrolytic gold over nickel plate.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.
Amplifier, Power, 1W 5.0-9.0 GHz
903239 -- Preliminary Information
MAAPGM0030
V DD
0.1 F
APGM0030 YWWLLLL
RFIN
RFOUT
RG See Electrical Characteristics- Page 2 VGG
0.1 F
Pin Number 1 2 3 4 5
RF Designator No Connection No Connection RF IN No Connection VGG No Connection No Connection RF OUT No Connection VDD
Figure 6. Recommended Bias Configuration
6 7 8 9 10
Assembly Instructions:
This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of the package to housing interface. Refer to M/A-COM Application Note #M567* for more information . For applications where surface mount components are to be installed after the CR-15 installation, this package will not be damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (ESD) safe. * Application Notes can be found by going to the Site Search Page on M/A-COM's web page (http://www.macom.com/search/search.jsp) and searching for the required Application Note.
Biasing Notes: A negative bias must be applied to VGG before applying a positive bias to VDD to prevent damage to the amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information.
* North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.

▲Up To Search▲

Price & Availability of MAAPGM0030

	To Download MAAPGM0030 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .